11:00 - 11:50 AM

An introduction to Synchro Studio, this session familiarizes attendees with Synchro Studio through demonstration of a real-life scenario where data such as intersection geometry, signal timing, and detector information are entered into the software to analyze the current timing plan for measures of effectiveness, such as delay and queue length, to optimize the timing plan for improved efficiency. This demonstration will include key features such as importing/exporting signal timing from Trafficware’s ATMS Central Management Software, importing traffic volumes, and optimizing coordination plans.
Class limit: 12

Training

11:00 - 11:50 AM

An introduction to the concepts of deep learning, this class walks attendees through the jargon, hype and reality of deep learning and its applications to Intelligent Transportation. Students gain a stronger understanding of how to evaluate deep learning claims and prospects in ITS.
Class limit: 12

Training

11:00 AM - 11:50 AM

This session prepares attendees to begin resolving field issues with NEMA TS-2 Type 1 and ATC Controllers. McCain ATC eX NEMA Controller and basic screens are used for troubleshooting exercises as attendees practice field triage. All attendees must bring a laptop computer for this session.

Class limit: 12

Training

11:00 - 11:50 AM

This is a methodical, walk-thru instruction of planning considerations for organizations to consider and follow when building a Cyber Incident Response Team (CIRT) ahead of experiencing a Data Breach or other reportable incidents.

This is a prerequisite to CIRT Table Top Exercise.
Class limit: 12

Training

11:00 - 11:50 AM

An introduction to the best practices of installing the GRIDSMART system, attendees participate in hands-on activities that provide a practical understanding of bringing a GRIDMSMART system online. A laptop computer is required for this session.
Class limit: 12

Training

11:00 - 11:50 AM

This session expands on attendees’ understanding of beneficial preventative maintenance procedures that reduce the number of traffic signal failures, ensuring the proper operation of traffic control devices. Attendees leave understanding common PM strategies and experience a hands-on look at stressed and broken components.
Class limit: 12

Training

2:00 - 2:50 PM

Time to put the CIRT planning and building training into action!

Participants are required to take the Team CIRT PLanning & Building before this class.
Class limit: 12

Training

2:00 - 2:50 PM

This session familiarizes attendees with signal monitor operations for troubleshooting the safe operation of the intersection and other fundamentals of conflict monitors. Standard NEMA features are discussed, along with a comparison of different monitors focusing on the TS2 MMU.
Class limit: 12

Training

2:00 - 2:50 PM

This session teaches attendees how to get the most of out of GRIDSMART’s advanced detection functionality. In addition to learning how to set up advanced detection zones, students will be taught how to effectively install hardware for maximum impact, and determine when it is best to use your iconic Bell Camera or the GRIDSMART ADC for advanced detection. Attendees leave the class understanding how to maximize their installation and prepare for high speed approaches, adaptive systems, and other advanced detection uses with GRIDSMART.
Class limit: 12

Training

2:00 - 2:50 PM

This session teaches attendees the exact process for installing SMARTMOUNT 2025 and the benefits of fiber optics at the intersection. Attendees prepare to efficiently and correctly install SMARTMOUNT 2025, including gaining a working knowledge of fiber termination techniques at the conclusion of the session
Class limit: 12

Training

2:00 - 2:50 PM

More info coming soon
Class limit: 12

Training

2:00 - 2:50 PM

An introduction to the fundamentals of STREETSMARTV2, attendees explore what comes after installing V2. Take an inventory of your community needs compared to expanded V2 functionality and learn how to set up reports, perform analyses, and maximize the benefits of V2 by GRIDSMART.
Class limit: 12

Training

3:00 - 3:50 PM

This session will use Trafficware’s Commander ATC Traffic Controller to demonstrate basic programming, including some advanced functionality such as applications for preemption and flashing yellow arrows. The graphical status screens will be used during this course to demonstrate controller operation.

Class limit: 12

Training

3:00 - 3:50 PM

You can provide the feedback that shapes product development by becoming a GRIDSMART Beta Tester. This session explores the benefits of being an early user of GRIDSMART technology. Learn what will be required of you, how you can make a difference in the final product, and why you may want to join the GRIDSMART Beta Tester fraternity.
Class limit: 12

Training

3:00 - 3:50 PM

In this session, attendees learn the proper steps of managing emergency knockdowns where the traffic cabinet and other intersection hardware has been damaged. Attendees learn how to assess the damage and safely return the intersection to operation. Attendees leave understanding not only how to bring the site back to operation, but also when it is acceptable to leave the site.
Class limit: 12

Training

3:00 - 3:50 PM

This class focuses on an introduction to using Ethernet as protocol of choice for traffic control, situational awareness, specific video surveillance, and other ITS applications. Attendees receive an overview on protocols, switches, routers, and converters. Students also learn how Ethernet is integrated into traffic controllers and cabinets.
Class limit: 12

Training

3:00 - 3:50 PM

STREETSMARTV2 is opening new markets to our Distributors by completing the picture for Data Collection. Not every intersection is a candidate for new detection, but all can benefit from travel time, origin destination, and other valuable Performance Metrics. Learn inside knowledge of how to grow your customer base using this phenomenal new addition to GRIDSMART’s product offerings. Participants will learn how to find your way into every cabinet by demonstrating the ROI on data collection, updated timing, and other innovative solutions V2 provides.
Class limit: 12

Training

3:00 - 3:50 PM

This session teaches attendees how to get the most of out of GRIDSMART’s advanced detection functionality. In addition to learning how to set up advanced detection zones, students will be taught how to effectively install hardware for maximum impact, and determine when it is best to use your iconic Bell Camera or the GRIDSMART ADC for advanced detection. Attendees leave the class understanding how to maximize their installation and prepare for high speed approaches, adaptive systems, and other advanced detection uses with GRIDSMART.
Class limit: 12

Training

4:00 - 4:50 PM

This session succeeds the popular GRIDSMART API session and teaches attendees how to use the GRIDSMART API, Streams Function, and other tools to visualize GRIDSMART data, images, and analysis tools through hands-on learning. Attendees leave this class with the competence to create GRIDSMART visualization tools in your community. (GRIDSMART API is a mandatory requirement for this class).
Class limit: 12

Training

4:00 - 4:50 PM

Is your ITS network resilient enough to respond and recover successfully when "Things Go Sideways"? Your critical data has been compromised. Someone has gone rogue, or was it negligence? More importantly; What happened to the information? What could you have done to prevent the Data Breach or System Failure? What CAN you do now to prepare your ITS network for an attack?

Penetration Tests are an important part of your proactive security strategy for your ITS networks. Not everyone can afford full-scope Pentests; nor do they need them. Passive Network Assessments (PNAs) and Self Assessments can provide a LOT of value; as will a resilient backup and recovery strategy. We’ll address these, and data breach case studies we’ve been involved with; addressing the impact on things you may never be able to control and maybe some which you can. Either way… it’ll be an interesting, journey from old-school risks and threats to cutting edge, IoT, Smart Technologies.
Class limit: 12

Training

4:00 - 4:50 PM

This session develops attendees’ understanding of intersection grounding best practices, tips and tricks for challenging grounding environments, and diagnosing EMI from external sources like LED Street Lights. Learn new strategies for diagnosing and mitigating EMI.
Class limit: 12

Training

4:00 - 4:50 PM

An introduction to the programming NEMA TS-2 and ATC controllers, this session uses the McCain ATC eX NEMA Controller to walk students through basic programming including various modes of flashing yellow arrows. Specific programing is reviewed for the controller and MMU. All attendees must bring a laptop computer for this session.
Class limit: 12

Training

4:00 - 4:50 PM

More information coming soon.
Class limit: 12

Training

11:00 - 11:50 AM

This session will use Trafficware’s Commander ATC Traffic Controller to demonstrate basic programming, including some advanced functionality such as applications for preemption and flashing yellow arrows. The graphical status screens will be used during this course to demonstrate controller operation.
Class limit: 12

Training

11:00 - 11:50 AM

This session prepares attendees for troubleshooting network communication issues from the NEMA traffic cabinet to the TMC. Attendees move beyond power cycling and checking physical connections to understand how to dig into network communication challenges.

Class limit: 12

Training

11:00 - 11:50 AM

This is a methodical, walk-thru instruction of planning considerations for organizations to consider and follow when building a Cyber Incident Response Team (CIRT) ahead of experiencing a Data Breach or other reportable incidents.

This is a prerequisite to CIRT Table Top Exercise.
Class limit: 12

Training

11:00 - 11:50 AM

An introduction to the best practices of installing the GRIDSMART system, attendees participate in hands-on activities that provide a practical understanding of bringing a GRIDMSMART system online. A laptop computer is required for this session.
Class limit: 12

Training

11:00 - 11:50 AM

This session expands on attendees’ understanding of beneficial preventative maintenance procedures that reduce the number of traffic signal failures, ensuring the proper operation of traffic control devices. Attendees leave understanding common PM strategies and experience a hands-on look at stressed and broken components.
Class limit: 12

Training

2:00 - 2:50 PM

This session teaches attendees how to get the most of out of GRIDSMART’s advanced detection functionality. In addition to learning how to set up advanced detection zones, students will be taught how to effectively install hardware for maximum impact, and determine when it is best to use your iconic Bell Camera or the GRIDSMART ADC for advanced detection. Attendees leave the class understanding how to maximize their installation and prepare for high speed approaches, adaptive systems, and other advanced detection uses with GRIDSMART.
Class limit: 12

Training

2:00 - 2:50 PM

This session teaches attendees procedures and strategies for implementing GRIDSMART into the traffic network. Attendees learn how to connect the GS₂ Processor to industry standard (TS 1, TS 2, 2070, and ATC) controllers and cabinets, common configurations, and basic troubleshooting.
Class limit: 12

Training

2:00 - 2:50 PM

This course teaches attendees the basics of bench diagnostics on GRIDSMART equipment while reviewing maintenance tips that lessen the need for RMA’s to ensure lower costs and greater customer uptime. Learn from the factory how to maximize field up time.
Class limit: 12

Training

2:00 - 2:50 PM

This session familiarizes attendees with signal monitor operations for troubleshooting the safe operation of the intersection and other fundamentals of conflict monitors. Standard NEMA features are discussed, along with a comparison of different monitors focusing on the TS2 MMU.
Class limit: 12

Training

2:00 - 2:50 PM

This session teaches attendees the exact process for installing SMARTMOUNT 2025 and the benefits of fiber optics at the intersection. Attendees prepare to efficiently and correctly install SMARTMOUNT 2025, including gaining a working knowledge of fiber termination techniques at the conclusion of the session
Class limit: 12

Training

2:00 - 2:50 PM

More info coming soon
Class limit: 12

Training

2:00 - 2:50 PM

This is a methodical, walk-thru instruction of planning considerations for organizations to consider and follow when building a Cyber Incident Response Team (CIRT) ahead of experiencing a Data Breach or other reportable incidents.

This is a prerequisite to CIRT Table Top Exercise.
Class limit: 12

Training

2:00 - 2:50 PM

An introduction to the fundamentals of STREETSMARTV2, attendees explore what comes after installing V2. Take an inventory of your community needs compared to expanded V2 functionality and learn how to set up reports, perform analyses, and maximize the benefits of V2 by GRIDSMART.
Class limit: 12

Training

2:00 - 2:50 PM

This session introduces the GRIDSMART Cloud and concentrates on the benefits of GRIDSMART Cloud connectivity. Learn how to install antennas, navigate screens, and other functionalities, such as setting up Teams. Students leave with the ability to set-up or reconfigure GRIDSMART Cloud in their community.
Class limit: 12

Training

3:00 - 3:50 PM

In this session, attendees learn the proper steps of managing emergency knockdowns where the traffic cabinet and other intersection hardware has been damaged. Attendees learn how to assess the damage and safely return the intersection to operation. Attendees leave understanding not only how to bring the site back to operation, but also when it is acceptable to leave the site.
Class limit: 12

Training

3:00 - 3:50 PM

STREETSMARTV2 is opening new markets to our Distributors by completing the picture for Data Collection. Not every intersection is a candidate for new detection, but all can benefit from travel time, origin destination, and other valuable Performance Metrics. Learn inside knowledge of how to grow your customer base using this phenomenal new addition to GRIDSMART’s product offerings. Participants will learn how to find your way into every cabinet by demonstrating the ROI on data collection, updated timing, and other innovative solutions V2 provides.
Class limit: 12

Training

3:00 - 3:50 PM

This session expands attendees’ understanding of the security features of GS₂. The class reinforces the value of existing security features while introducing the latest security features designed to mitigate breaches. Learn how to protect your devices from the architects of the software.
Class limit: 12

Training

3:00 - 3:50 PM

This session teaches attendees how to get the most of out of GRIDSMART’s advanced detection functionality. In addition to learning how to set up advanced detection zones, students will be taught how to effectively install hardware for maximum impact, and determine when it is best to use your iconic Bell Camera or the GRIDSMART ADC for advanced detection. Attendees leave the class understanding how to maximize their installation and prepare for high speed approaches, adaptive systems, and other advanced detection uses with GRIDSMART.
Class limit: 12

Training

3:00 - 3:50 PM

This session teaches attendees how to use tools like Google Earth and GRIDSMART checklist to prepare for the most efficient and successful GRIDSMART installation. Attendees leave feeling prepared to deploy safe, fast, and efficient installations.
Class limit: 12

Training

4:00 - 4:50 PM

An introduction to the programming NEMA TS-2 and ATC controllers, this session uses the McCain ATC eX NEMA Controller to walk students through basic programming including various modes of flashing yellow arrows. Specific programing is reviewed for the controller and MMU. All attendees must bring a laptop computer for this session.
Class limit: 12

Training

4:00 - 4:50 PM

Is your ITS network resilient enough to respond and recover successfully when "Things Go Sideways"? Your critical data has been compromised. Someone has gone rogue, or was it negligence? More importantly; What happened to the information? What could you have done to prevent the Data Breach or System Failure? What CAN you do now to prepare your ITS network for an attack?

Penetration Tests are an important part of your proactive security strategy for your ITS networks. Not everyone can afford full-scope Pentests; nor do they need them. Passive Network Assessments (PNAs) and Self Assessments can provide a LOT of value; as will a resilient backup and recovery strategy. We’ll address these, and data breach case studies we’ve been involved with; addressing the impact on things you may never be able to control and maybe some which you can. Either way… it’ll be an interesting, journey from old-school risks and threats to cutting edge, IoT, Smart Technologies.
Class limit: 12

Training

4:00 - 4:50 PM

This session develops attendees’ understanding of intersection grounding best practices, tips and tricks for challenging grounding environments, and diagnosing EMI from external sources like LED Street Lights. Learn new strategies for diagnosing and mitigating EMI.
Class limit: 12

Training

4:00 - 4:50 PM

This session succeeds the popular GRIDSMART API session and teaches attendees how to use the GRIDSMART API, Streams Function, and other tools to visualize GRIDSMART data, images, and analysis tools through hands-on learning. Attendees leave this class with the competence to create GRIDSMART visualization tools in your community. (GRIDSMART API is a mandatory requirement for this class).
Class limit: 12

Training

4:00 - 4:50 PM

More information coming soon.
Class limit: 12

Training